Allied Vision Technologies AVT Stingray Manuál s instrukcemi Strana 88

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 309
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 87
Camera interfaces
STINGRAY Technical Manual V2.2.0
87
Output modes
PinState 0 switches off the output transistor and produces a low level over
the resistor connected from the output to ground.
The following diagram illustrates the dependencies of the various output sig-
nals.
0xF1000328 IO_OUTP_CTRL3 Same as
IO_OUTP_CTRL1
0xF100032C IO_OUTP_CTRL4 Same as
IO_OUTP_CTRL1
ID Mode Default / description
0x00 Off
0x01 Output state follows PinState bit Using this mode, the Polarity bit
has to be set to 0 (not inverted).
This is necessary for an error free
display of the output status.
0x02 Integration enable
Output 1
0x03 Reserved
0x04 Reserved
0x05 Reserved
0x06 FrameValid
0x07 Busy
Output 2
0x08 Follow corresponding input
(Inp1 Out1, Inp2 Out2)
0x09 PWM (=pulse-width modulation) Stingray housing and board level
models
0x0A..0x1F Reserved
Table 28: Output routing
Register Name Field Bit Description
Table 27: Advanced register: Output control
Zobrazit stránku 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 308 309

Komentáře k této Příručce

Žádné komentáře